Call (951) 698-3456

GMC

/GMC

We Service and Repair Most GMC Cars and Trucks

2018 GMC Sierra 2500 HD

2022-10-19T22:00:21+00:00

GMC Sierra 2500 HD

Mileage
53,041
Service Date
10/18/2022
Services Performed
  • AXLE SHAFT – Remove & Replace – 4WD Front Axle,One Side – [Independent Suspension. NOTE: For Independent Suspension Type Axles, this operation consists of removal and installation, dissassembly and reassembly of the Axle Shaft Assembly and replacement of
  • REPLACE OUTER CV BOOT ONCE AXLE IS OUT
 
JIM G. gave our service a 5 star review on 10/18/2022
2018 GMC Sierra 2500 HD 2022-10-19T22:00:21+00:00

2020 GMC Sierra 1500

2022-03-29T22:00:27+00:00

GMC Sierra 1500

Mileage
26,375
Service Date
3/23/2022
Services Performed
  • PERFORM SMOG CHECK INSPECTION YEAR MODEL 2000 AND NEWER – MOST VEHICLES. NO CHARGE FOR RE-CHECK IF VEHICLE DOES NOT PASS.
  • DIGITAL SMOG CERTIFICATE
 
ANDREW V. gave our service a 5 star review on 3/26/2022
2020 GMC Sierra 1500 2022-03-29T22:00:27+00:00

2005 GMC Yukon

2022-03-02T23:01:30+00:00

GMC Yukon

Mileage
130,472
Service Date
2/23/2022
Services Performed
  • INSPECTED AND FOUND: OIL PRESSURE SWITCH APPEARS TO NOT BE LEAKING. VALVE COVERS APPEAR TO BE SEEPING. VALLEY PAN AND CAMSHAFT POSITION SENSOR BOTH APPEAR TO BE LEAKING. REAR MAIN SEAL COULD BE LEAKING. OIL PAN COULD BE LEAKING. ALWAYS RECOMMEND RESOLVE UPPER LEAK(S) FIRST, AS OIL FLOWS DOWN AND REARWARD MOST OF THE TIME. NECESSARY TO REMOVE INTAKE PLENUM / MANIFOLD ASSEMBLY FOR FURTHER INSPECTION, BUT SUSPECT FIRST RECOMMENDED REPAIR WILL BE: – RESEAL VALLEY COVER WITH REPLACEMENT OF KNOCK SENSORS AND RELATED WIRING HARNESS AND SEALS – REPLACE CAMSHAFT POSITION SENSOR – RESEAL VALVE COVERS – REPLACE OIL PRESSURE SENSOR AND RELATED WIRING HARNESS PIGTAIL (AS MAINTENANCE, SINCE THERE WILL BE NO LABOR TO REPLACE IT WHILE ALREADY APART) – CLEAN UP AND RE-CHECK FOR ANY OTHER OIL LEAK(S) INITIAL LABOR WILL BE TO REMOVE INTAKE PLENUM TO GAIN MORE ACCESS FOR BETTER VISUAL INSPECTION, AS FIRST STEP.
  • GIVE ESTIMATE ON DRIVER SIDE CATALYTIC CONVERTER
  • CATALYTIC CONVERTER – Remove & Replace – Base,5.3L Eng Assembly,Y-Pipe
  • FOUND: VALLEY COVER SEEPING VALVE COVERS SEEPING ************* O I L P R E S S U R E S E N S O R L O O S E – WIGGLING WOBBLING L O O S E !!!!!!!!!!!!!!!!!!!!! ***************** OIL PRESSURE SENSOR HARNESS CONNECTOR DAMAGED. REINSPECTING KNOCK SENSOR WORK WHICH MAY HAVE BEEN DONE, AS THERE IS SILICONE SEALING THOSE UP. REMOVED FRONT ONE FOR INSPECTION. CAN SEE THAT KNOCK SENSORS AND KNOCK SENSORS HARNESS HAS BEEN REPLACED. RECOMMEND REPLACE HARNESS WHICH COMES WITH NEW GROMMETS AT SAME TIME AS RESEALING VALLEY COVER. ************ SPECIAL NOTE: REAR MAIN SEAL LOOKS LIKE IT IS LEAKING BUT RECOMMEND DO UPPER LEAKS FIRST, THEN SEE IF ANY OTHER LEAKS PERSIST. REASON: THE GROSS UPPER LEAKS COULD BE LEAKING DOWN ONTO THE REAR MAIN SEAL, CAUSING IT TO APPEAR AS IF IT IS LEAKING.
 
IRVINE C. gave our service a 5 star review on 2/28/2022
2005 GMC Yukon 2022-03-02T23:01:30+00:00

2004 GMC Yukon XL

2022-01-01T23:00:54+00:00

GMC Yukon XL

Mileage
188,031
Service Date
12/17/2021
Services Performed
  • PERFORM SMOG CHECK INSPECTION YEAR MODEL 2000 AND NEWER – MOST VEHICLES. NO CHARGE FOR RE-CHECK IF VEHICLE DOES NOT PASS.
  • DIGITAL SMOG CERTIFICATE
 
TREVOR B. gave our service a 5 star review on 12/29/2021
2004 GMC Yukon XL 2022-01-01T23:00:54+00:00

2011 GMC Acadia

2021-10-05T22:01:49+00:00

GMC Acadia

Mileage
54,065
Service Date
10/4/2021
Services Performed
  • Power steering noisy P.T.S R/F axle leaking P.T.S
 
JULIE N. gave our service a 5 star review on 10/4/2021
2011 GMC Acadia 2021-10-05T22:01:49+00:00